august 1998 1/4 this is advance information from stmicroelectronics. details are subject to change without notice. ST623X-KIT starter kit for st6230 and st6232 mcus hardware features n immediate evaluation of st6230 and st6232 devices, with stand-alone demonstration routines. n simulation and debugging within the users real application environment. n in-socket programming of all otp and eprom st6230 (dip28) and st6232 (sdip42) devices. n in-circuit programming of all otp and eprom st6230 and st6232 devices directly on the us- ers application board (all packages). software features n software simulation, including i/o read/write. n assembler, linker and simulator. n in-socket otp and eprom programming utilities. n in-circuit otp and eprom programming utilities n application examples and demonstrations 729
2/4 ST623X-KIT the starter kit board the starter kit board includes the following re- sources: ? reset and data control buttons. ?led indicators. ? resistance trimmer. ? temperature control circuit. ? rs-232 interface. ? demonstration program selector jumpers. ? three 7-segment displays. ? a voltage control oscillator. it comes with its own power supply unit that can be plugged into an ac mains source, or a dc source with the following characteristics: ? voltage: 16v min./20v max., current: 100 ma min. it includes the following connectors: ? a parallel port connector (p1) for connection to the host pc when it is used as a hardware sim- ulator or for programming. ? a remote resource i/o interface connector (j2) to which you can connect your own hardware resource. ? an rs-232 connector, which you can use for observing rs-232 communication control using an st6. ? a connector for your own in-circuit st6 pro- gramming board. 730
3/4 ST623X-KIT the following diagram shows the layout of the starter kit board. 1 in-circuit programming connector (j1). 11 thermistor. 2 demonstration routine selector. 12 reset button. 3 8 mhz oscillator. 13 + and - buttons. 4 pc connector p1. 14 rs232 interface circuit and connector. 5 leds. 15 7-segment displays. 6 voltage control oscillator. 16 dip 28 zif mcu socket. 7 power supply jack connector j3. 17 remote resource i/o interface connector j2. 8 heater resistor led indicator ld4. 18 sdip 42 zif mcu socket. 9 power supply led indicator ld5. 19 10 k w trimmer. 10 heater resistor. 20 programming or user operating mode selection jumpers w2. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 w11 w12 w2 w1 20 w4 w6 w5 w3 st6230 st6232 729
4/4 ST623X-KIT figure 2. block diagram of the starter kit board ? ordering information information furnished is believed to be accurate and reliable. however, stmicroelectronics assumes no responsibility for the co nsequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of stmicroelectronics. specifications mentioned in this publicati on are subject to change without notice. this publication supersedes and replaces all information previously supplied. stmicroelectronics prod ucts are not authorized for use as critical components in life support devices or systems without the express written approval of stmicroele ctronics. the st logo is a registered trademark of stmicroelectronics ? 1998 stmicroelectronics - all rights reserved. purchase of i 2 c components by stmicroelectronics conveys a license under the philips i 2 c patent. rights to use these components in an i 2 c system is granted provided that the system conforms to the i 2 c standard specification as defined by philips. stmicroelectronics group of companies australia - brazil - canada - china - france - germany - italy - japan - korea - malaysia - malta - mexico - morocco - the neth erlands - singapore - spain - sweden - switzerland - taiwan - thailand - united kingdom - u.s.a. http://www.st.com unit power supply parallel connection to pc and software simulator in-circuit programming j1 rs232 p2 user application st623x i/o connection st62e32 j3 jp1 p1 eprom programmer dac temperature control trimmer j2 display vco uart spi sales type description ST623X-KIT/uk starter kit for st6230 and st6232 mcus for operation in united kingdom ST623X-KIT/110 starter kit for st6230 and st6232 mcus for operation from 110 vac mains ST623X-KIT/220 starter kit for st6230 and st6232 mcus for operation from 220 vac mains 730
|
